|
|
|
|
|
首頁 >>> 產品目錄 >>> 日本竹中SEEKA/TAKEX >>> 光纖放大器
|
|
產品[TAKEX竹中光纖放大器F71RK]資料
|
如果您對該產品感興趣的話,可以
產品名稱:
TAKEX竹中光纖放大器F71RK
產品型號:
產品展商:
日本竹中TAKEX
簡單介紹
TAKEX竹中光纖放大器F71RK
原裝正 品TAKEX竹中光纖放大器F71RK
|
|
TAKEX竹中光纖放大器F71RK的詳細介紹
|
|
TAKEX竹中光纖放大器F71RK
F71RK
Rating/Performance/Specification
|
Power supply
|
12 - 24VDC ± 10% / Ripple 10% or less
|
|
Current consumption
|
35 mA or less
|
|
Output mode
|
Control output (*) : Open collector output / Rating: Sink current 100 mA (30 VDC) or less / Residual voltage: 1 V or less
Stability output (*) : Open collector output / Rating: Sink current 100 mA (30 VDC) or less / Residual voltage: 1 V or less
|
|
Operation mode
|
Light ON/Dark ON selecting operation (by switch)
|
|
Timer
|
On delay/off delay/disabled selectable (by switch)
Delay time: Approx. 40ms fixed
|
|
Response time
|
With switch at 4: (turbo function disabled) 250 μs or less
With switch at 8: (turbo function enabled) 500 μs or less
|
|
Light source (wavelength)
|
Red LED (680nm)
|
|
Indicator
|
Operation indicator: orange LED / Light stability indicator: green LED
|
|
Volume
|
SENS: sensitivity adjustment volume (8-turn indicator)
|
|
Switch
|
- Light ON/Dark ON selector switch: L.ON for Light ON, D.ON for Dark ON
- Timer selector switch: NOR. for ON/OFF operation, ON.D for on delay (40 ms), OFF.D for off delay (40 ms)
- Mutual Interference prevention/turbo mode selector switch
(common)
8: M
|
|
Mutual Interference prevention
|
Provided
|
|
Short circuit protection
|
Provided
|
|
Material
|
Polycarbonate
|
|
Connection between amplifier units
|
Connector (for power supply)
Input-output connection Connector: (using a dedicated connector cable *2)
|
|
Maximum number of attachments and detachments of connector
|
50
|
|
Weight
|
Approx. 20 g (main unit only)
|
|
Default settings
|
Sensitivity: Maximum
Mode selector switch: L.ON (ON when light is received)
Timer selector switch: NOR (Output timer is OFF)
Mutual Interference prevention switch: at 4 (turbo function is OFF)
|
|
Accessory
|
Screwdriver for adjustment, Mounting bracket, Light shielding sticker (excluding H type), Instruction manual, Terminal cap
|
* If you extend the system, the output current will differ according to the place of power supply.
When the power supply is for the center part,
Control output is 50 mA or less; stability output is 20 mA or less
When the power supply is for the either end,
Control output is 20 mA or less; stability output is 20 mA or less
Detection can start when more than 0.5 seconds has passed after power-up. If the load and this sensor use different power
sources, be sure to turn on the sensor first.
*1 For high speed response models, the detecting distance is generally about 30% of normal models.
*2 Please use a connector cable dedicated for input-output connection which is sold separately.
Power/output connector cable
Model F7K-4 (4 core; colors of lead wires: brown, blue, black, orange)
Model F7K-3 (3 core; colors of lead wires: brown, blue, black)
Connector cable dedicated for output
Model F7K-2 (2 core; colors of lead wires: black, orange)
Model F7K-1 (1 core; colors of lead wire: black)
Environmental Specification
|
Ambient light
|
Incandescent lamp: 10,000 lx / Sunlight: 20,000 lx
|
|
Ambient temperature
|
1-3 adjacent units in operation: -25 ‐ +55℃
4-10 adjacent units in operation: -25 ‐ +50℃
11-16 adjacent units in operation: -25 ‐ +45℃
Storage: -40 - +70℃ (no freezing)
|
|
Ambient humidity
|
35 - 85%RH (non-condensing)
|
|
Protective structure
|
IP40
|
|
Noise
|
Power supply line: 500 V / Cycle: 10 ms / Pulse duration: 1 μs
Radiation: 1kV / Cycle: 10 ms / Pulse duration: 1 μs (with noise simulator)
|
|
Vibration
|
10 ‐ 55Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
|
|
Shock
|
500 m/s2 / 3 times each in 3 directions
|
|
Dielectric withstanding
|
1000 VAC for 1 minute
|
|
Insulation resistance
|
500 VDC, 20MΩ or more
|
公司簡介：
深圳市創豐儀器儀表有限公司是一家專業從事進口自動化產品代理銷售及系統
集成的高新技術商貿企業,位于深圳市寶安寶源路廣福大廈（寶安互聯網基地旁）
主營品牌有azbil,takex,keyence,omron,sunx,fotek,honeywell,banner,moujen,toho
balluff,sick,riko等知名品牌.長期以來，創豐公司以多年的行業經驗、充
足的貨源、優惠合理的價格、良好的商業信譽、優 質.快捷的服務、再配合具有
國際知名度的品牌，已將所代理的產品廣泛應用在全 國各地的冶金，化工，機
械，電子,包裝，數控機床,熱處理,紡織機械,輕工、食品包裝、家電等行業，
并贏得廣大用戶的高度信賴與好評,建立起良好長久的合作關系。
深圳市創豐儀器儀表有限公司
深圳市寶安區寶源路廣福大廈1003
|
|
|
|
